home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Ham Radio 2000
/
Ham Radio 2000.iso
/
ham2000
/
tcp_ip
/
gp
/
add_ons.doc
< prev
next >
Wrap
Text File
|
1992-01-02
|
4KB
|
71 lines
[English follows after the German text]
Hallo Leute,
die Version 1.60 von 7PLUS unterscheidet sich nur dadurch von der
v1.50, dass jetzt Ein-Byte-Fehler automatisch korrigiert werden,
d.h. ein Byte pro Zeile kann fehlen, falsch oder zusätzlich vor-
handen sein und 7PLUS wird die Zeile selbstätig wieder herstellen.
Dies ist durch eine zusätzliche Prüfsumme für jede Zeile möglich.
Die Prüfsumme wird durch die zusätzlichen zwei Zeichen am Ende
des Headers und jeder Code-Zeile dargestellt.
Die Files, die mit der v1.60 kodiert wurden, können problemlos mit
allen Versionen ab v1.4 dekodiert werden.
Bei Versionen kleiner als v1.4 müssen die letzten beiden Bytes je-
der Zeile manuell entfernt werden, da sonst alle Zeilen defekt ge-
meldet werden!
Für die v1.60 gilt die Anleitung der v1.50, da sich an der Bedie-
nung nichts geändert hat.
Bei Version 1.61 ist lediglich die Geschwindigkeit der Rekonstruk-
tion defekter Zeilen optimiert worden (40% schneller) und eine An-
zeige, welche Zeile gerade rekonstruhiert wurde, hinzugefügt.
Bei sehr langsamen PCs kann die Rekonstruktion einer Zeile sehr
lange dauern! Bei einem 16Mhz AT dauert es bis zu 3 Sekunden.
Die Zeit hängt auch davon ab, an welcher Position in der Zeile
sich der Fehler befindet. Je weiter der Fehler vorne liegt, desto
länger dauert es. Man muss sich dabei vor Augen führen, dass immer-
hin bis zu 14472 Versuche notwendig sind, um eine Zeile zu rekon-
struieren!
Die v1.63 ist leider notwendig geworden, aufgrund eines Unfalls bei
der Amiga-Version, der allerdings nicht durch mein Verschulden oder
Programmierfehler meinerseits enstanden ist!
Hello friends,
the only difference between the v1.60 and the v1.50 is that lines
containing one-byte-errors are automatically corrected. 7PLUS will
reconstruct a line when one byte is missing, wrong or superfluous.
This is made possible through the addition of an extra checksum
to the header and each line of code. The extra checksum is repre-
sented by two extra bytes at the end of each line.
Files encoded with the v1.60 may be decoded with all versions be-
ginning with version 1.4. To decode with version 1.3 and older,
it is necessary to strip the last two bytes from each line manually.
Otherwise, all lines would be reported corrupted!
The manual for the v1.50 is also valid for the v1.60, because there
wheren't any changes made to the handling of 7PLUS.
In version 1.61 the speed of the reconstruction algorithm has been
optimized to run 40% faster. Also the number of the line having been
reconstructed will now be output to the screen.
Note that the reconstruction of a line may take quite a long time
on very slow PCs. On a standard 16MHz AT, it will take up to three
seconds. The time needed depends on what position the line is corrup-
ted at. The nearer the error lies to the start of the line, the lon-
ger it will take. Bear in mind that up to 14472 tries are necessary
to reconstruct a faulty line!
Version 1.63 was necessary due a an accident with the AMIGA-version,
that was not caused by me, nor by faulty programming by myself.
73s, Axel.